No edit summary
 
(7 intermediate revisions by the same user not shown)
Line 14: Line 14:
</pre>
</pre>


Documentation can be found in the man pages or here: http://wiringpi.com/the-gpio-utility/.
Documentation can be found in the man pages or here: http://wiringpi.com/the-gpio-utility/. Test the tool using:
 
And then tested:


<pre>gpio readall</pre>
<pre>gpio readall</pre>
Line 48: Line 46:
</pre>
</pre>


Use the table to determine the correct pin. The wPi column is the ID for the pin. Use:
Use the table to determine the correct pin. The wPi column is the ID for the pin. For output, use the following command to change the corresponding pin's mode '''gpio mode <pin> in/out/pwm/clock/up/down/tri''':


<pre>gpio set mode out</pre>
<pre>gpio mode 2 out</pre>


To set the mode. Once the mode is set correctly, use:
Once the mode is set correctly, use:


<pre>gpio write 0 1</pre>
<pre>gpio write 0 1</pre>
Line 61: Line 59:


== Python ==
== Python ==
Follow the instructions at https://opi-gpio.readthedocs.io/en/latest/


Install PIP
Install PIP
<pre>sudo apt-get install python3-pip</pre>
<pre>sudo apt-get install python-pip</pre>
 
Install the GPIO library:
 
<pre> sudo pip install --upgrade OPi.GPIO</pre>
 
A simple python script to turn the flag off or on:
 
<pre>
import OPi.GPIO as GPIO
import time
 
GPIO.setmode(GPIO.BOARD)
GPIO.setup(11, GPIO.OUT)
 
# turn it off
GPIO.output(11,GPIO.HIGH)
 
# turn pin 11 on and wait 5 seconds
GPIO.output(11,GPIO.LOW)
time.sleep(5)


Follow the instructions at https://opi-gpio.readthedocs.io/en/latest/
#turn it back off
GPIO.output(11,GPIO.HIGH)
GPIO.cleanup()
</pre>

Latest revision as of 04:49, 13 April 2018

OrangePi Zero Pinout

Using GPIO w/ Orange PI

GPIO can be modified from the command line using WiringOP:

git clone https://github.com/zhaolei/WiringOP.git -b h3 
cd WiringOP
chmod +x ./build
sudo ./build

Documentation can be found in the man pages or here: http://wiringpi.com/the-gpio-utility/. Test the tool using:

gpio readall
 +-----+-----+----------+------+---+-Orange Pi+---+---+------+---------+-----+--+
 | BCM | wPi |   Name   | Mode | V | Physical | V | Mode | Name     | wPi | BCM |
 +-----+-----+----------+------+---+----++----+---+------+----------+-----+-----+
 |     |     |     3.3v |      |   |  1 || 2  |   |      | 5v       |     |     |
 |  12 |   8 |    SDA.0 | ALT5 | 0 |  3 || 4  |   |      | 5V       |     |     |
 |  11 |   9 |    SCL.0 | ALT5 | 0 |  5 || 6  |   |      | 0v       |     |     |
 |   6 |   7 |   GPIO.7 | ALT3 | 0 |  7 || 8  | 0 | ALT5 | TxD3     | 15  | 13  |
 |     |     |       0v |      |   |  9 || 10 | 0 | ALT5 | RxD3     | 16  | 14  |
 |   1 |   0 |     RxD2 |  OUT | 1 | 11 || 12 | 0 | ALT3 | GPIO.1   | 1   | 110 |
 |   0 |   2 |     TxD2 | ALT5 | 0 | 13 || 14 |   |      | 0v       |     |     |
 |   3 |   3 |     CTS2 | ALT3 | 0 | 15 || 16 | 0 | ALT3 | GPIO.4   | 4   | 68  |
 |     |     |     3.3v |      |   | 17 || 18 | 0 | ALT3 | GPIO.5   | 5   | 71  |
 |  64 |  12 |     MOSI | ALT4 | 0 | 19 || 20 |   |      | 0v       |     |     |
 |  65 |  13 |     MISO | ALT4 | 1 | 21 || 22 | 0 | ALT3 | RTS2     | 6   | 2   |
 |  66 |  14 |     SCLK | ALT4 | 0 | 23 || 24 | 0 | ALT4 | CE0      | 10  | 67  |
 |     |     |       0v |      |   | 25 || 26 | 0 | ALT3 | GPIO.11  | 11  | 21  |
 |  19 |  30 |    SDA.1 | ALT4 | 0 | 27 || 28 | 0 | ALT4 | SCL.1    | 31  | 18  |
 |   7 |  21 |  GPIO.21 | ALT3 | 0 | 29 || 30 |   |      | 0v       |     |     |
 |   8 |  22 |  GPIO.22 | ALT3 | 0 | 31 || 32 | 0 | ALT3 | RTS1     | 26  | 200 |
 |   9 |  23 |  GPIO.23 | ALT3 | 0 | 33 || 34 |   |      | 0v       |     |     |
 |  10 |  24 |  GPIO.24 | ALT3 | 0 | 35 || 36 | 0 | ALT3 | CTS1     | 27  | 201 |
 |  20 |  25 |  GPIO.25 |  OUT | 1 | 37 || 38 | 0 | ALT5 | TxD1     | 28  | 198 |
 |     |     |       0v |      |   | 39 || 40 | 0 | ALT5 | RxD1     | 29  | 199 |
 +-----+-----+----------+------+---+----++----+---+------+----------+-----+-----+
 | BCM | wPi |   Name   | Mode | V | Physical | V | Mode | Name     | wPi | BCM |
 +-----+-----+----------+------+---+-Orange Pi+---+------+----------+-----+-----+

Use the table to determine the correct pin. The wPi column is the ID for the pin. For output, use the following command to change the corresponding pin's mode gpio mode <pin> in/out/pwm/clock/up/down/tri:

gpio mode 2 out

Once the mode is set correctly, use:

gpio write 0 1

To turn the flag off, and then:

gpio write 0 0 

Python

Follow the instructions at https://opi-gpio.readthedocs.io/en/latest/

Install PIP

sudo apt-get install python-pip

Install the GPIO library:

 sudo pip install --upgrade OPi.GPIO

A simple python script to turn the flag off or on:

import OPi.GPIO as GPIO
import time

GPIO.setmode(GPIO.BOARD)
GPIO.setup(11, GPIO.OUT)

# turn it off
GPIO.output(11,GPIO.HIGH)

# turn pin 11 on and wait 5 seconds
GPIO.output(11,GPIO.LOW)
time.sleep(5)

#turn it back off
GPIO.output(11,GPIO.HIGH)
GPIO.cleanup()