CAD Dimensions: Difference between revisions
No edit summary |
(→M3) |
||
| Line 6: | Line 6: | ||
* M3 Socket Head = 6mm | * M3 Socket Head = 6mm | ||
* M3 Support Nut Slot = 2.62 x 5.65 x 5.14mm past center of screw path | * M3 Support Nut Slot = 2.62 x 5.65 x 5.14mm past center of screw path | ||
* M3 Socket = 5.6 cap, 3.1 deep, 3.1 shaft | |||
== M5 == | == M5 == | ||
Revision as of 05:58, 5 August 2024
I found myself having to go back and look these up in past designs, so here's a list of commonly used dimensions that seem to work w/ my printers.
M3
- M3 Nut = 2.825 (radius)
- M3 Hole = 3mm
- M3 Socket Head = 6mm
- M3 Support Nut Slot = 2.62 x 5.65 x 5.14mm past center of screw path
- M3 Socket = 5.6 cap, 3.1 deep, 3.1 shaft
M5
Extrusion Rails
- Draw an 8.5mm tall square the length of the part and extrude by 1.5mm
- Add a 1.5mm chaffer to top and bottom