Tips for Pulling Engine

Prep

  1. Spray Rust Pentrant
    1. Exhaust Manifold
    2. Engine Mounts
  2. Drain Coolant
  3. Drain Oil
  4. Mark Plug Wires

Underneath

  1. Disconnect Exhaust Manifold
  2. Mark Bolt on Torque Converter w/ White Paint

Front

  1. Alternator
  2. Power Steering
  3. Compressor
  4. Intake (Upper and Lower)
  5. Fan, Radiator, Condensor

Engine Mount

  1. Remove Engine Mount to Frame Nuts
  2. Loosen Engine Mount to Engine Bolts
  3. Once Engine is on Hoist, Remove Engine Mount Entire to Make it Easier to Dismount/Mount Transmission